Sony PCS-XG80 Operating Instructions Manual page 70

"AUDIO 1" or "AUDIO 2", and one
auxiliary external input from "AUDIO 1" or
"AUDIO 2".
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied with the PCS-
XG80) or PCSA-A3 microphone (not
supplied) connected to the MIC (A1/A3)
jacks on the Communication System.
EC-MIC (A7): Select use of the PCSA-A7
echo canceling microphone (not
supplied) connected to the EC-MIC
(A7) jacks on the Communication
System.
AUDIO 1: Select to input the audio of
external equipment connected to the
AUDIO 1 IN jacks on the
Communication System.
AUDIO 2: Select to input the audio of
external equipment connected to the
AUDIO 2 IN jacks on the
Communication System.
Echo Canceller
Allows you to select whether to use the
internal echo canceller.
On: Enables the internal echo canceller.
Off: Disables the internal echo canceller.
Lip Sync
Allows you to select whether to use the
function.
Sync
Auto: Enables the Lip Sync function.
Off: Disables the Lip Sync function.
Notes
• When "Adaptive Rate Control (ARC)",
"Packet Resend Request (ARQ)" or
"Forward Error Correction (FEC)" is set to
"On" in the QoS setup menu, you cannot set
"Lip Sync" to "Off".
• When "Lip Sync" is set to "Off", you cannot
change the setting for "Adaptive Rate
Control (ARC)", "Packet Resend Request
(ARQ)" or "Forward Error Correction
(FEC)" in the QoS setup menu.
Recording Mute
When you connect an audio recording
device to the AUDIO 1 IN or AUDIO 2 IN
and REC OUT jacks to record audio, this
function reduces oscillations in sound that
occur due to loop-back within audio
recording device.
70
Registering Local Information
Off: Disables the recording mute function.
On: Enables the recording mute function.
Notes
• When "Recording Mute" is set to "On", only
signals from external equipment are affected.
Signals from the microphones or remote sites
are not affected. Therefore, the Recording
Mute functions only when "Audio Input" is
set to "AUX" or "MIC+AUX."
• When connecting an audio recording device
to the AUDIO 1 IN or AUDIO 2 IN and REC
OUT jacks, set "Recording Mute" to "On"
and record the sound only from the audio
recording device. If you want to record the
sound on your site as well, also use the
microphone input.
Input Mode
Allows you to select the input audio mode.
Stereo: Inputs audio to the R/L jacks of the
audio input as stereo left and right
sounds.
Monaural: Inputs audio to the R/L jacks of
the audio input as monaural sound.
Output Mode
Allows you to select the output audio mode.
Stereo: Outputs audio from the AUDIO
OUT R/L or HDMI OUT jacks as stereo
Lip
left and right sounds.
Monaural: Outputs audio from the AUDIO
OUT R/L or HDMI OUT jacks as
monaural sound.
Audio2
AUX Local Monitor Out
Allows you to select whether the audio input
from the AUDIO 1 IN or AUDIO 2 IN jacks
outputs to the audio output jacks on the
Communication System.
On: Enables output from the audio output.
Off: Disables output from the audio output.
Reversed MIC Inputs
Allows you to select whether to transmit the
audio input from the microphone with right
and left reversed. If you select "On", you can
match the right and left of the camera image
and audio.
Basic Setup2