On Items In The Dial Setup Menu - Sony PCS-1500 Service Manual

Calling a Remote Party
5
Press the EXEC button on the Remote Commander.
The Manual Dial menu appears on the monitor screen
again.
6
Press the DIAL ( ) button on the Remote Commander.
The system dials the number that is input in step 2, and the
indication "Dialing ..." appears on the monitor screen.
When the connection is completed, the indication
"MEETING STARTS!" appears on the monitor screen.
To cancel dialing before the connection is completed
Press the CANCEL button on the Remote Commander.

On Items in the Dial Setup Menu

The settings for the Dial Setup menu are as follows:
Dial Setup
LINE I/F :ISDN BRI
ISDN RATE :AUTO
AUDIO MODE :G. 728 & G. 722
VIDEO MODE :H. 263 CIF 15fps
CAMERA CONTROL :H. 281
DATA :OFF
SELECT:
LINE I/F
ISDN BRI: Connects to a remote party via the normal ISDN
line.
ISDN BRI (Bonding): Connects to a remote party via the
Inverse Multiplexer interface.
"Bonding (Bandwidth on Demand Interoperability
Group)" is a trademark of THE BONDING
CONSORTIUM.
ISDN BRI (Speech): Connects to a normal phone to have a
voice meeting.
26
Chapter 2 Basic Operation During a Meeting
Save? Yes: EXEC No: CANCEL
V.35 (with RS-366): Connects to a remote party via the V.35
interface by specifying the telephone number.
V.35 (without RS-366): Connects to a remote party via the
V.35 interface without specifying the telephone number.
ISDN RATE
AUTO: Connects to a remote party with a normal ISDN line.
56K: Connects to a region or country with a 56 Kbps ISDN
transfer rate.
AUDIO MODE
G.722: The audio bandwidth is wider for better sound quality.
(7 kHz)
G.728 & G.722: The audio bandwidth is narrow but the
image quality is better. (G.728: 3.4 kHz)
VIDEO MODE
H.261 CIF 15fps: Sends pictures based on Recommendation
H.261 at a maximum rate of 15 frames per second.
H.261 CIF 30fps: Sends pictures based on Recommendation
H.261 at a maximum rate of 30 frames per second.
H.263 CIF 15fps: Sends pictures based on Recommendation
H.263 at a maximum rate of 15 frames per second.
H.263 CIF 30fps: Sends pictures based on Recommendation
H.263 at a maximum rate of 30 frames per second.
CAMERA CONTROL
H.281: Controls the remote camera with the far end camera
control protocol based on Recommendation H.281.
OFF: Does not control the remote camera.
DATA
T.120: Holds a T.120 data meeting.
OFF: Does not hold a T.120 data meeting.
Note
When the optional V.35 Board has not been installed, you can
select neither V.35 (with RS-366) nor V.35 (without RS-366)
of LINE I/F.
Chapter 2 Basic Operation During a Meeting
27