Quick Connection Guide Using Direct Dial
To begin with
Turn on your HD Visual Communication System and TV monitor, and check the following to ensure that
connection is possible.
Let's connect
/// (arrow)
buttons and
ENTER button
CONNECT button
BACK SPACE
button
Buttons used for
number input
DOT button
©2008 Sony Corporation
HD Visual Communication System PCS-XG80/XG80S
Is the IP address of
the local system* or
the ISDN line number
displayed?
Is the picture of your
camera (local picture)
on the monitor
screen?
After checking...
1
2
Select the Line I/F and
press ENTER.*
Line I/F
Select the Line
Press.
I/F to use.
* The Line I/F cannot be selected
depending on the system setup.
For details on operations, refer to the Operating Instructions
(stored in the supplied CD-ROM).
Note:
Connection to a remote
party is not possible if neither
the IP address * nor ISDN line
number is not displayed.
* You can hide the IP address of
the local system using the setup
menu.
3
Select the number text
Select "Dial" and press
box and press ENTER.
ENTER.
Number text box
Enter the IP
address or
ISDN line
number of a
remote party.
Main indicators that appear during
communication
Controlling a remote camera
Local microphone is turned off.
Presentation (transmission) is being
executed.
Presentation (reception) is being
executed.
Local party has a drawing right of
annotation.
The system establishes
communication.
Dial
Or, press
.
3-875-772-13 (1)