Video Setup Menu - Sony Ipela PCS-XG80 Operating Instructions Manual

Dial Tone
Allows you to select whether to output a
ring-back and busy tones when you are
dialing.
You can select from among "Large",
"Medium", "Small" and "Off".
Ringer Tone
Allows you to select whether to output a
ringer tone when you receive a call.
You can select from among "Large",
"Medium", "Small" and "Off".

Video Setup Menu

The Video setup menu is used to set up video
input/output.
Video1
Basic Setup
Video Input
Allows you to select the video input.
Camera: Selects the camera picture from
the camera connected to the CAMERA
connector.
RGB: Selects the video signal from the
external equipment connected to the
RGB connector.
YPbPr: Selects the video signal from the
external equipment connected to the
VIDEO IN YPbPr connector.
S VIDEO: Selects the video signal from the
external equipment connected to the S
VIDEO IN connector.
Presentation Screen
Allows you to select the picture switched by
the PRESENTATION button on the Remote
Commander.
Full: Displays the picture from the external
equipment connected to the RGB IN
connector in full screen mode.
PandP: Displays the picture from the
external equipment connected to the
RGB IN connector in PandP mode.
Side by Side: Displays the picture from the
external equipment connected to the
RGB IN connector in Side by Side
mode.
62
Registering Local Information
Monitor Output
Allows you to select the video signal output
from the Communication System.
HDMI: Outputs the video signal to the
external equipment connected to the
HDMI OUT connector.
RGB: Outputs the video signal to the
external equipment connected to the
RGB OUT connector.
HDMI+RGB: Outputs the video signal to
the external equipment connected to the
HDMI OUT and RGB OUT connectors.
Frequency
Allows you to select the frequency of 50 Hz
or 60 Hz for video input/output.
RGB Monitor Output Format
Allows you to select the format of the signal
output from the RGB OUT connector.
SXGA: Outputs the SXGA signal.
XGA: Outputs the XGA signal.
WXGA: Outputs the WXGA signal.
Video2
Custom Input
Label
Allows you to set the names of the selected
video inputs using up to 12 characters.
Custom Input Label (Camera): Selects
when "Camera" is selected in "Video
Input".
Custom Input Label (RGB): Selects when
"RGB" is selected in "Video Input".
Custom Input Label (YPbPr): Selects
when "YPbPr" is selected in "Video
Input".
Custom Input Label (S VIDEO): Selects
when "S VIDEO" is selected in "Video
Input".
Video3
Link to Mic
Allows you to select whether to link an
audio input to the selected video input.
Link to Audio Input
Allows you to switch the audio input in
conjunction with switching the video input
by linking each video input and a specific
microphone or other audio input.