For ISDN (Telephone) connection: Select "TEL" from the drop-down
list, and enter the telephone number with "T" at the beginning (ex. :
Enter all the parties to which you want to make a multipoint connection.
Set up other items.
For details on the setup, see step 3 in "Registering a New Remote Party"
on page 119.
Select "Save", then press the ENTER button on the Remote Commander.
Registration of the multipoint connection list is completed.
To specify a remote party registered in the Phone Book to the multipoint
Use the V, v, B or b button on the Remote Commander to select the name
you want to register in the multipoint connection list.
button on the Remote Commander to display the submenu, press the V, v,
B or b button to select "
and the remote party is registered in the multipoint connection list.
You can add the
button on the Remote Commander. Or press the ENTER
(multipoint) mark is added to the lower right of the selected list,
marks to up to five parties using the same procedure as
One-Touch Dial Specified
Number of Connected Sites
Communication Bit Rate
Number of Lines
On", then press the ENTER button.