Download  Print this page

Sony PCS-XG80 Operating Instructions Manual Page 229

Hd visual communication system.
Hide thumbs

Advertisement

Message
178
LAN connection rejected: Try again later.
179
DNS error.
180
Dialing your own number is invalid.
181
GateKeeper error.
192
PPPoE server admission has failed. Check the PPPoE User Name and Password are
entered correctly.
195
Now obtaining an IP address via DHCP.
196
Configure the DNS address or use the IP address to dial.
205
Check the user name or user number for dialing is correct.
207
The remote terminal may not be registered in gatekeeper. Contact the gatekeeper
administrator.
209 – 212
Gatekeeper does not respond. Contact the gatekeeper administrator, or use the IP address
to dial.
201, 217
Call not responded.
218
Local number is not set correctly in the ISDN Setup menu. Set it correctly. Line
connected with 1B (64K).
219
Local number setting for ISDN configuration may not be correct in the remote party.
Line connected with 1B (64K).
230, 231
PPPoE server admission fails. Dial again after confirmation of the PPPoE settings.
232
Access to the DNS server has failed. Check the PPPoE DNS settings.
233
Connection to the remote party via DNS disabled. Dial using IP address.
234
Dialing the same address is invalid.
235
Regarded as a secondary terminal as the number of lines for ISDN configuration is
different.
236
Regarded as a secondary terminal as Far End Camera Control is set to Off.
237
Check the line interface or the IP address is set correctly.
238
The conference could not start because the encryption feature at the near-end side was
disabled.
239
The conference could not start because the encryption feature at the far-end side was
disabled.
240
The conference could not start because the signal encryption method at the near-end side
differed from that of the far-end side.
241
The standard encryption videoconference with SIP connection is not available.
242
The Proprietary encryption videoconference with ISDN connection is not available.
243
Connection with the current communication mode is not available via the specified line
interface.
244
Disconnected due to failure to receive packet from remote site.
On-Screen Messages
229

Advertisement

Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:

Pcs-xg80gPcs-xg80sPcs-rf1

Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me