Chapter 3: Basic
This chapter describes how to connect to a remote party after the administrator
has completed various registrations and settings for the system.
The chapter explains a point-to-point communication via a LAN connection,
ISDN connection using the optional PCSA-B384S or PCSA-B768S ISDN
Unit or SIP.
For use of optional equipment, see Chapter 4.
To conduct an encrypted communication, see Chapter 5.
To conduct a multipoint communication, see Chapter 6.
Starting a Connection by Calling a
You can start a communication with a remote party by dialing. Once you have
made a connection to the remote party, you can begin talking just as with a
normal phone call and start communication.
You can call a remote party using the various methods described below. Use
any one depending on the settings in the Home menu or connecting status.
• To call a remote party by using the simple dial menu (page 105)
• To call a remote party by entering their address or number directly (Direct
Dial) (page 106)
• To call a remote party by using the one-touch dial buttons (page 108)
• To call a remote party by using the history list (page 109)
• To call a remote party registered in the Phone Book (page 110)
• To call a remote party not registered in the Phone Book by setting the
necessary items in the Detailed Dial menu (page 112)
Turning On the Power
Turn on the TV monitor.
Turn on other equipment you are using for the communication.
Starting a Connection by Calling a Remote Party
(power) switch on the Communication System to turn it on.