Sony PCS-XG80 Operating Instructions Manual page 74

Gateway Address
Enter the default gateway address.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
LAN Mode
Allows you to select the interface type and
the communication mode of the LAN
connection.
Auto: The interface type and the
communication mode are detected
automatically.
100Mbps Full Duplex: Connects via
100BASE-TX in full duplex mode.
100Mbps Half Duplex: Connects via
100BASE-TX in half duplex mode.
10Mbps Full Duplex: Connects via
10BASE-T in full duplex mode.
10Mbps Half Duplex: Connects via
10BASE-T in half duplex mode.
Prefix Length
Configure the prefix length of the IPv6
address within the range of 0 to 128.
Notes
• The item "Prefix Length" is displayed only
when "DHCP Mode" is set to "On".
• The setting of "Prefix Length" is common to
both LAN1 and LAN2.
LAN
PPPoE
PPPoE
Allows you to select whether to use PPPoE
for LAN connection.
When using PPPoE, you can use the B
FLET'S* or FLET'S ADSL service without
connecting a router.
Off: Does not use PPPoE.
LAN1: Uses PPPoE for LAN connection
using the 1 (LAN1) connector.
LAN2: Uses PPPoE for LAN connection
using the 2 (LAN2) connector.
74
Registering Local Information
Notes
• Operations of PPPoE for LAN connection
are presently verified only for the Japanese
NTT B FLET'S and FLET'S ADSL services.
• The PPPoE registration status appears at the
bottom of the screen for each page.
* "FLET'S" is a trademark of NTT East and
NTT West Corporations in Japan.
User Alias
Enter a user name when you use PPPoE for
LAN connection.
Password
Enter a password when you use PPPoE for
LAN connection.
Fixed IP for PPPoE
Select whether to make a PPPoE connection
using a fixed IP address.
Off: Does not use a fixed IP address for a
PPPoE connection.
On: Uses a fixed IP address for a PPPoE
connection.
Fixed IP Address for PPPoE
Enter an IP address when "Fixed IP for
PPPoE" is set to "On".
DNS
Allows you to select whether to obtain DNS
server addresses automatically or to specify
them manually when connecting to a LAN
using PPPoE.
Obtain automatically: Assigns DNS server
addresses automatically.
Specify: Allows you to specify DNS server
addresses.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
LAN
NAT Setup
NAT Mode
Allows you to select whether you connect
the system to a local network using Network
Address Translation (NAT), which allows