Connecting A Computer; Making A Presentation - Sony PCS-XG80 Operating Instructions Manual

Connecting a Computer

Connecting cable with the
D-sub 15-pin connectors

Making a Presentation

To configure the presentation mode
When you transmit an RGB picture from a computer, etc. and a camera picture
simultaneously to a remote party, the remote party can view both pictures
simultaneously. This function is called "to make a presentation using the
presentation mode complying with H.239". To make a presentation using the
presentation mode complying with H.239, it is necessary to turn on the
presentation mode on both the local and remote systems. If the presentation
mode on either of the systems is turned off, a presentation complying with
H.239 cannot be made.
To configure the presentation mode, set "H.239" to "On" on the IP: Mode page
(page 66) or on the ISDN: Mode page (page 68) of the Communication setup
menu.
To start a presentation
1
Press the TOOLS button on the Remote Commander to open the Tools
menu.
2
Press the b button on the Remote Commander and press the V, v, B or b
button to select "Execute" for "Presentation".
The RGB picture from the computer is transmitted to the remote party.
150
Using the Computer Picture for Presentation
VISCA OUT
TERMINAL
CAMERA S VIDEO IN RGB IN RGB OUT
EC-MIC(A7) MIC(A1/A3)
1(R) 2(L)
1 2
R L R L R L
(PLUG IN POWER) AUDIO 1 IN AUDIO OUT REC OUT
to RGB IN
(not supplied)
to RGB OUT
Computer
HDMI OUT ISDN UNIT AUX CONTROL
DC 19.5V
1-EXT-2 1 2