To conduct a video conference
Select "IP" under "Line I/F", enter the remote party's IP address, and dial.
LAN Connection Using PPPoE (LAN1/LAN2)
When using PPPoE, you can connect via LAN without a router.
A modem (using bridge mode) is required when using FLET'S ADSL.
Set "PPPoE" to "LAN1" or "LAN2" under the PPPoE page in the LAN
setup menu, and enter the PPPoE user name and PPPoE password given to
you by the provider.
If you have a fixed IP from the provider, set "Fixed IP for PPPoE" to "On",
and enter your fixed IP address for PPPoE in "Fixed IP Address for
PPPoE" under the PPPoE page in the LAN setup menu.
The setting has been configured properly if the correct IP address appears
in the Home menu.
If the fixed DNS server address is specified by the provider, set "DNS" to
"Specify", and enter the specific addresses in "Primary DNS" and "Secondary
Remote parties must configure in the same way.
Fixed IP for PPPoE
Fixed IP Address for PPPoE
210. 10. 10. 10
Setting Up the Network Configurations