Network Routing Check - Sony PCS-XG80 Operating Instructions Manual

Network Routing Check

The Network Routing Check menu is used to
check the network routing, and it shows the
checking results.
You can start the network routing check by
selecting "Start Measurement" in the lower
part of the menu.
For details, see "About the Network Routing
Check" on page 103.
IP address of remote site
Enter the IP address of the remote terminal
you want to check.
Line I/F
LAN1: Select to perform the routing check
for the network connected to the
connector.
LAN2: Select to perform the routing check
for the network connected to the
connector.
Gateway
Displays the results of check for the default
gateway.
ping
Displays the results of check for
reachability, packet loss, RTT (Round-Trip
Time) and H.323 (H.323 communication
availability).
traceroute
Displays the results of check for HOP
(number of routers passed through to reach
the remote site) and total RTT.
Start Measurement
Select this button to start a network routing
check.
Previous
Select this button to restore the Machine
Status menu.
1
2
Displaying the Machine Status
93