Download  Print this page

Sony PCS-XG80 Operating Instructions Manual Page 59

Hd visual communication system.
Hide thumbs

Advertisement

3
Repeat step 2 to enter all the letters or numbers.
4
After the input is complete, select "End", then press the ENTER button on
the Remote Commander.
To enter a symbol
1
Select "Symbol" on the on-screen keyboard, then press the ENTER button
on the Remote Commander.
The submenu with available symbols are displayed.
2
Use the V, v, B or b button on the Remote Commander to select the
desired symbol, then press the ENTER button.
The selected symbol is entered.
3
Repeat steps 1 and 2 to enter all the symbols.
4
After the input is complete, select "End", then press the ENTER button on
the Remote Commander.
To enter a dot (.) for an IP address
Select "b" or "Dot" on the on-screen keyboard, then press the ENTER button
on the Remote Commander.
To enter a space
Select "Space", then press the ENTER button on the Remote Commander.
To delete a character
To erase the last entered character, select "Back Space", then press the ENTER
button on the Remote Commander.
To delete all the characters entered
Select "Cancel", then press the ENTER button on the Remote Commander.
59
Using the Menus

Advertisement

Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:

Pcs-xg80gPcs-xg80sPcs-rf1

Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me