PCSA-CXG80 HD Camera
Unit (Supplied with
This Camera Unit is not supplied with
Location and Function of Parts and Controls
This is a 10-magnification optical zoom
b POWER/STANDBY indicator
Lights in green when the System is
turned on. When the System is set to
standby mode or is turned off, it lights in
c TERMINAL connector
Connect to the CAMERA connector on
d Receiver of the RF Remote
Point the supplied RF Remote
Commander at this receiver when
pairing with the Camera Unit.
e VISCA OUT connector
Used for VISCA communications.
When a second camera is connected to
the System, connect to the VISCA IN
connector on the second camera.
f Tripod attachment screw hole
Use to attach the camera to a tripod.
For details on the tripod screw, see
"Attaching the PCSA-CXG80 HD
Camera Unit to a Tripod" on page 35.
g Fixing screw holes
Use to fix the camera to a fitting.
h Attachment locations for
When you use the supplied
hook-and-loop pads, stick them to these