Connection Examples of a Multipoint
Connection
Using the LAN Connection (Up to Six Points)
Installing the optional PCSA-MCG80 HD MCU software in an HD Visual
Communication System allows you to connect multiple points up to six.
If you have already made a point-to-point connection when a third point calls,
the system automatically starts multipoint connection.
/
to
(100BASE-TX/
10BASE-T)
UTP cable (category 5, straight)
(not supplied)
Note
For a multipoint connection only the Communication System with the PCSA-MCG80
HD MCU software installed can be used as main terminal. If you want to use multiple
Communication Systems as main terminals depending on the type of connection, the
same number of HD MCU software as that of main terminals is required to install.
182
Connection Examples of a Multipoint Connection
POWER/STANDBY
PCSA-MCG80 HD
MCU software
1 or
2
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
to LAN