Sony PCS-XG80 Operating Instructions Manual page 61

2
Use the V, v, B or b button to select "Setup", then press the ENTER button
on the Remote Commander.
The Setup menu appears on the monitor screen.
Menus available in a setup menu
There are the prominent types of the setup menus in this system described
below. A setup menu that includes many menus is divided into multiple
pages, from among which you can select the appropriate menu button to
open the menu and set the respective items.
The minimum number of menu butttons is displayed on the screen at the
factory. Pressing the F4 button on the Remote Commander allows you to
display the maximum number of menu buttons. To restore the default
minimum display, press the F4 button again.
Menu buttons
Setup Line I/F
Line I/F
Home
Dial
Back to Tools Answer
Multipoint
Audio1
Video2
LAN1
LAN2
LAN3
SIP
For a description of each setup menu, see the page for that menu indicated
below.
Line Interface setup menu (see page 64)
Dial setup menu (see page 64)
Answer setup menu (see page 65)
Multipoint setup menu (see page 65)
Communication setup menu (see page 66)
Audio setup menu (see page 69)
Video setup menu (see page 71)
LAN setup menu (see page 73)
QoS setup menu (see page 75)
TOS setup menu (see page 77)
SIP setup menu (see page 77)
ISDN setup menu (see page 78)
Annotation setup menu (see page 79)
Camera setup menu (see page 80)
General setup menu (see page 80)
Home Menu setup menu (see page 82)
Administrator setup menu (see page 83)
Encryption setup menu (see page 87)
Shared Phone Book setup menu (see page 88)
Line Interface
IP I SD N SI P
Primary Line Interface
IP I SD N S I P
Use LAN2 Off
Registering Local Information
61