Download  Print this page

Sony PCS-XG80 Operating Instructions Manual Page 116

Hd visual communication system.
Hide thumbs

Advertisement

Note
See pages 129 to 139 to adjust the sound and picture during communication.
To receive a call in manual answer mode
When you receive a call, the Communication System rings and the message
"Incoming call. Answer?" appears on the monitor screen.
Press V, v, B or b to select "OK", then press the ENTER button. The system
is then connected. Once the connection is made, the picture of the remote party
is displayed on the local monitor screen and the sound is heard. The picture and
sound on the local site will be enabled on the remote site at the same time.
The message "Session Connected." appears on the monitor screen.
You are now ready to start a communication.
Note
See pages 129 to 139 to adjust the sound and picture during communication.
When you do not want to answer the call
Press V, v, B or b to select "Cancel", then press the ENTER button. Ringing
stops, and the connection is canceled.
When the system fails to make an ISDN connection
If the system fails to connect to the remote party, the message "Cannot
complete connection. (an ISDN cause code and a message are displayed here)"
appears on the monitor screen.
For details on ISDN cause codes and messages, see "On-Screen Messages"
on page 228.
116
Receiving a Call from a Remote Party

Advertisement

Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:

Pcs-xg80gPcs-xg80sPcs-rf1

Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me