The indicator on the System starts flashing, then lights in green when the
power is on.
The Home menu appears on the monitor screen and the picture shot by the
local camera also appears.
After the power is turned on, the camera moves automatically for trial operation. Be
careful not to catch your finger.
Calling a Remote Party by Using the Simple Dial Menu
This method is available when the Connect button is displayed in the Home
Use the V, v, B or b button on the Remote Commander to select "Connect"
in the Home menu, then press the ENTER button.
The Simple Dial menu appears.
Starting a Connection by Calling a Remote Party
Ready to connect.