Download  Print this page

Ending The Connection - Sony PCS-XG80 Operating Instructions Manual

Hd visual communication system.
Hide thumbs


Ending the Connection

Press the DISCONNECT (
The message "Disconnect?" appears on the monitor screen.
Press the DISCONNECT (
or press the V, v, B or b button on the Remote Commander to select "OK",
then press the ENTER button.
The system is disconnected.
The power of the Communication System remains on even if the system is
To cancel disconnection of the system
Select "Cancel" with the V, v, B or b button on the Remote Commander, then
press the ENTER button.
To register the connected remote party in the Phone Book
You can easily register the remote party who has just disconnected.
If you set "Last Number Registration" to "On" on the Device Setup page of the
General setup menu, the message "Register this participant in the list?"
appears after a communication with an unregistered remote party is finished.
When you select "OK", the List Edit menu appears.
If the "Last Number Registration" is set to "Off", the message does not appear.
For "Last Number Registration" setting, see "General Setup Menu" on page
) button on the Remote Commander.
) button on the Remote Commander again,
Ending the Connection


Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me