Download  Print this page

Sony PCS-XG80 Operating Instructions Manual Page 39

Hd visual communication system.
Hide thumbs

Advertisement

To pair the Communication System with the Remote Commander again
Follow the procedure below to release the paring with the Camera Unit, and to
perform pairing with the System again.
1
Turn on the Communication System.
2
Set "RF Remote Control Reception" to "System" on the Device Setup page
of the General setup menu (page 81).
3
Within three minutes after the power is on, locate the Remote Commander
closer to the Communication System, and press the RETURN and TOOLS
buttons at the same time.
The LED indicator flashes rapidly.
4
Press the ENTER button on the Remote Commander.
If the LED indicator flashes more slowly, pairing between the units has
succeeded.
Preparing the System
39

Advertisement

Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:

Pcs-xg80gPcs-xg80sPcs-rf1

Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me