Download  Print this page

Communication Setup Menu - Sony PCS-XG80 Operating Instructions Manual

Hd visual communication system.
Hide thumbs

Advertisement

Note
When there is only one terminal connected, the
display switches to full screen regardless of the
selection of the setting.

Communication Setup Menu

The Communication setup menu is used to
set up communications.
Note
The contents of the Communication menu vary
with "Line Interface" setting in the Line I/F
setup menu, or "Individual Settings for
Transmission/Reception" or "Individual
Settings for Point-to-Point/Multipoint" setting
in the Communication setup menu.
The Communication page number after the
Communication2 page also varies according to
the number of setting items.
Communication
IP
The menu is used to set up the
communication mode for the LAN
connection.
Individual Settings for Transmission/
Reception
Allows you to select whether to configure
the LAN settings for transmission and
reception individually.
Off: Select to configure the LAN settings for
transmission and reception commonly.
On: Select to configure the LAN settings for
transmission and reception individually.
Individual Settings for Point-to-Point/
Multipoint
Allows you to select whether to configure
the LAN settings for a point-to-point
connection and multipoint connection
individually.
Off: Select to configure the LAN settings for
both connections commonly.
On: Select to configure the LAN settings for
a point-to-point connection and
multipoint connection individually.
66
Registering Local Information
Note
The setting items and page numbers in the IP:
Mode page vary according to the setting of
"Individual Settings".
Communication
IP: Mode
Total Bandwidth
Allows you to select the total bandwidth to
be used with this system.
In multipoint connection, the total
bandwidth of all points is displayed.
You can select from among 128Kbps,
384Kbps, 512Kbps, 1Mbps, 2Mbps, 3Mbps,
4Mbps, 5Mbps, 6Mbps, 7Mbps, 8Mbps,
9Mbps, 10Mbps and Other.
Note
In multipoint connection, the actual
Communication Bit Rate for each point is
automatically adjusted so as not to exceed
"Total Bandwidth".
Communication Bit Rate
Allows you to select the communication bit
rate per point.
When "Individual Settings for
Transmission/Reception" or "Individual
Settings for Point-to-Point/Multipoint" on
the IP page is set to "On", you can set this
item for transmission and reception, and
point-to-point and multipoint connections
individually.
You can select from among 128Kbps,
384Kbps, 512Kbps, 1Mbps, 2Mbps, 3Mbps,
4Mbps, 5Mbps, 6Mbps, 7Mbps, 8Mbps,
9Mbps, 10Mbps and Other.
Audio Mode
Allows you to select the compression format
of audio to be sent to a remote party. When
"Individual Settings for Transmission/
Reception" or "Individual Settings for Point-
to-Point/Multipoint" on the IP page is set to
"On", you can set this item for transmission
and reception, and point-to-point and
multipoint connections individually.
You can select from among G.711, G.722,
G.728 and MPEG4 (MPEG4 AAC).

Advertisement

Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:

Pcs-xg80gPcs-xg80sPcs-rf1

Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me