Download  Print this page

Sony PCS-XG80 Operating Instructions Manual Page 46

Hd visual communication system.
Hide thumbs

Advertisement

2
Select the line interface to be used.
Wizard
Which is your Line I/F?: Select from among IP, ISDN and SIP.
Which is your primary Line I/F?: If you select two or more interfaces
with "Which is your Line I/F?", select the interface you most use.
Select from among IP, ISDN and SIP.
3
Use the V, v, B or b button on the Remote Commander to select "Save",
then press the ENTER button.
The setup wizard appears.
To set up a LAN connection
Select "Set up LAN" in the setup wizard, then set up a LAN connection.
To set up an ISDN line
Select "Set up ISDN" in the setup wizard, then set up an ISDN line connection.
To set up a SIP
Select "Set up SIP" in the setup wizard, then set up a SIP connection.
46
Setting Up the System Immediately after the Installation — Initial Setup Wizard
Select Line I/F
Which is your Line I/F? (Multiple selection available)
Select Line I/F
IP
Which is your primary Line I/F?
IP
ISD N
SI P
I SD N
SI P
Save
Cancel

Advertisement

Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:

Pcs-xg80gPcs-xg80sPcs-rf1

Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me