Sony PCS-XG80 Operating Instructions Manual page 136

During communication pressing the F1 button on the Remote Commander
switches between the camera on the local site and that on the remote site.
When two cameras are connected, pressing the F2 button on the Remote
Commander switches between the first and second cameras.
The selected camera is shown at the top of the Camera menu.
3
Use the V, v, B or b button on the Remote Commander to select "Preset",
then press the ENTER button.
The Preset Setting List appears.
4
Use the V, v, B or b on the Remote Commander to select "New Entry",
then press the ENTER button.
The Preset Save menu appears.
5
Use the V, v, B or b button on the Remote Commander to select "Preset
Number", then select the number to which the setting is stored.
Only the numbers that have not been used for presetting are selectable.
6
Use the V, v, B or b button on the Remote Commander to select
"Adjustments" under "Camera Angle", then press the ENTER button, if
you want to adjust the camera zoom and angle.
The Angle Adjustment menu is displayed and you can adjust the zoom and
angle.
For the adjustment procedures, see "Adjusting the Camera Angle and
Zoom" on page 132.
136
Adjusting the Camera
Adjustments > Preset Setting List
Local Camera : First Camera
New Entry
Back to Home
1 2
4 5
Adjustments > Preset Save
1
Preset Number
Camera Angle Adjustments
Register in Thumbnail/List
Thumbnails
Save
3
6
Cancel