Download  Print this page

Switching The Broadcast Mode - Sony PCS-XG80 Operating Instructions Manual

Hd visual communication system.
Hide thumbs

Advertisement

Switching the Broadcast Mode

At the beginning of the connection, the broadcast mode set in "Broadcast
Mode" and "Split" of the Multipoint setup menu is applied. You can change
the mode during communication using the Layout menu.
1
Press the LAYOUT button on the Remote Commander.
The Layout menu appears.
2
Use the V, v, B or b button on the Remote Commander to select the mode
to which you want to switch from "Broadcast Mode", then press the
ENTER button.
Layout
Screen Display Patterns
Full
PinP
Monitor Select Mode
HDMI
Broadcast Mode
Split
Split: Selects the Split mode.
Split (A fixed): Fixes the picture of the terminal connected first in the
specified window of the fixed split mode.
Split (B fixed): Fixes the picture of the terminal connected second in the
specified window of the fixed split mode.
Split (C fixed): Fixes the picture of the terminal connected third in the
specified window of the fixed split mode.
Split (D fixed): Fixes the picture of the terminal connected fourth in the
specified window of the fixed split mode.
Split (E fixed): Fixes the picture of the terminal connected fifth in the
specified window of the fixed split mode.
Split (Near End Fixed): Fixes the local picture in the specified window of the
fixed split mode.
Voice Activate: Selects "Voice Activate" mode.
Self Broadcast: Broadcasts the local picture in broadcast select mode.
PandP
Side by Side
PinP
PinP
RGB
HDMI+RGB
Terminal
0
Save
PinP
PinP
Cancel
Using the Display Control
201

Advertisement

Table of Contents

   Related Manuals for Sony PCS-XG80

This manual is also suitable for:

Pcs-xg80gPcs-xg80sPcs-rf1

Comments to this Manuals

Symbols: 0
Latest comments:
  • suriya Dec 10, 2013 06:56:
    how to use the symbols in dialing pad....?
    h​elp me