LAN Connection through a Gatekeeper (LAN1 Only)
Configuration example
LAN (A)
192.100.10.1
/
192.100.10.10
User alias: PCS-A
User number: 100
1
Enter a name in "Host Name" under the Basic Setup page in the LAN setup
menu, and enter the appropriate values for "IP Address", "Network Mask",
and "Gateway Address".
Setup
2
Set "Gatekeeper Mode" to "On" under the Gatekeeper page of the LAN
setup menu, and enter the appropriate values for "Gatekeeper Address",
"User Alias", and "User Number".
Setup
The setting has been configured properly if the correct IP address appears
in the Home menu and "Registration Confirmed" appears on the lower part
of the Gatekeeper page in the LAN setup menu.
Router
Gatekeeper
192.100.10.20
LAN
Basic Setup
LAN1
Host Name
DHCP Mode
IP Address
Network Mask
Gateway Address
Primary DNS
Secondary DNS
LAN Mode
LAN
Gatekeeper
LAN4
Gatekeeper Mode
Gatekeeper Address
User Alias
User Number
H.460
Setting Up the Network Configurations
LAN (B)
192.100.20.1
Router
/
192.100.20.20
User alias: PCS-B
User number: 200
Sony
Off
192.100. 10. 10
255.255.255. 0
192.100. 10. 1
Auto
Save
Cancel
On
192.100. 10. 20
PCS-A
100
Off
Save
Cancel
97