Switching the Picture Displayed on the
You can display the pictures on the local and remote sites on the monitor
screen at the same time. This enables you to check how your own party is
monitored on the remote site.
Press the LAYOUT button on the Remote Commander.
The Layout menu appears.
Screen Display Patterns
Monitor Select Mode
Use the V, v, B or b button on the Remote Commander to select one of the
screen display patterns, then press the ENTER button.
You can select from among the following eight patterns:
Full: Displays the remote picture in full screen.
PandP: Displays the remote picture on the left of the screen in large size
and the local picture on the right in small size.
Side by Side: Displays the remote and local pictures side by side.
PinP: Displays the local window picture in the remote full picture.
You can select the location of the window picture from among five
To store the selected screen display pattern in the memory of the system,
use the V, v, B or b button on the Remote Commander to select "Save",
then press the ENTER button.
The Layout menu disappears.
To swap the location of the remote and local pictures
When the displayed picture can be switched during communication, pressing
the LAYOUT button on the Remote Commander displays the indication "F1:
Switching the Picture Displayed on the Monitor Screen
Side by Side