Sony PCS-XG80 Operating Instructions Manual page 72

YPbPr: Selects the video signal from the
external equipment connected to the
VIDEO IN YPbPr connector.
S-VIDEO: Selects the video signal from the
external equipment connected to the S
VIDEO IN connector.
Presentation Screen
Allows you to select the display pattern of
the presentation screen.
Full Screen: Displays the computer picture,
etc. from the external equipment
connected to the RGB IN connector in
full screen mode.
PandP: Displays the computer picture, etc.
from the external equipment connected
to the RGB IN connector and the
selected input picuture such as a camera
picture in PandP mode.
Side by Side: Displays the computer
picture, etc. from the external equipment
connected to the RGB IN connector and
the selected input picture such as a
camera picture in Side by Side mode.
Monitor Output
Allows you to select the video signal output
from the Communication System.
HDMI: Outputs the video signal to the
external equipment connected to the
HDMI OUT connector.
RGB: Outputs the video signal to the
external equipment connected to the
RGB OUT connector.
HDMI+RGB: Outputs the video signal to
the external equipment connected to the
HDMI OUT and RGB OUT connectors.
Note
If "Monitor Output" is set to "HDMI+RGB"
when no HDMI monitor is connected to the
Communication System, you cannot view the
menus. Before making this setting, be sure to
connect an HDMI monitor.
Frequency
Allows you to select the frequency of 50 Hz
or 60 Hz for video input/output.
RGB Monitor Output Format
Allows you to select the format of the signal
output from the RGB OUT connector.
SXGA: Outputs the SXGA signal.
72
Registering Local Information
XGA: Outputs the XGA signal.
WXGA: Outputs the WXGA signal.
Blanking Period
Allows you to select the blackout period that
occurs temporarily when the input picture is
switched when the monitor is connected to
the HDMI OUT connector.
You can select among from Large, Medium
and Small.
Video2
Custom Input
Label
Allows you to set the names of the selected
video inputs using up to 12 characters.
Custom Input Label (Camera)
Selects when "Camera" is selected in
"Video Input".
Custom Input Label (RGB)
Selects when "RGB" is selected in "Video
Input".
Custom Input Label (YPbPr)
Selects when "YPbPr" is selected in "Video
Input".
Custom Input Label (S VIDEO)
Selects when "S VIDEO" is selected in
"Video Input".
Video3
Link to Mic
Allows you to select whether to link an
audio input to the selected video input.
Link to Audio Input
Allows you to switch the audio input in
conjunction with switching the video input
by linking each video input and a specific
microphone or other audio input.
Off: Switches the video input and the
microphone or other audio input
separately.
On: Links switching of the video input and
the microphone or other audio input.
Note
When "Link to Audio Input" is set to "On",
"Audio Input", "Input Select (MIC)" and