Q Dial button
To call a remote party whose number or address has been entered in the
number input box, select this button, then press the ENTER button on the
R One-touch dial buttons
The submenu is displayed when you select a thumbnail for a remote party
you want to call and press the ENTER button on the Remote Commander.
Using the submenu you can call the remote party.
You can also call the remote parties assigned to the one-touch buttons by
pressing the F1 to F4 buttons on the Remote Commander.
1 Video input
The selected video input on the local system is displayed.
The displayed video input is shown as the label set in "Custom Input
Label" in the Video setup menu.
2 Audio input
The selected audio input on the local system is displayed.
3 LAN status
The current status of LAN connection is shown. The LAN indicator is
shown in white when LAN is enabled for use and in gray when it is
4 ISDN status
The current status of the ISDN unit ports is shown. The port indicator is
shown in white when it is enabled for use and in gray when it is disabled.
The status indicators indicating that the microphone is off, a "Memory
Stick" is inserted, a pen tablet is connected, etc. are displayed.
6 Audio level meter
The current audio input level is displayed.
Using the Menus