Identifying A User - Sony PCS-XG80 Operating Instructions Manual

Identifying a User

Once you reach the Web page, the following window will be displayed asking
you to identify yourself as the user.
Enter one of the following user names (see below) into the "User Name" box
and the corresponding password into the "Password" box, then click the [OK]
button.
Each character of a password is shown as " * " on the screen.
When the user name and password are correct, the "Home" menu will come
up.
If an incorrect user name or password is entered, you are asked to enter it again.
When the incorrect entries are made three times, an error message appears on
the screen.
You can select a user name from the following and enter the password for the
selected user name.
[remote]
Enter the Remote Access Password set in the Administrator setup menu. You
can access and check the "Phonebook" and "Setup" pages.
[address]
Enter the Phone Book Modification Password set in the Administrator setup
menu. You can access the "Phonebook" page, change the setting of the page,
and register a new entry onto the page. And you can check the "Setup" pages.
[sonypcs]
Enter the Administrator Password set in the Administrator setup menu. You
can access the "Phonebook" page, change the setting of the page, and register
a new entry onto the page. And you can check and modify the "Setup" pages.
209
Identifying a User