Using The Lan Cascade And Isdn Connection - Sony PCS-XG80 Operating Instructions Manual

Note
The connection example described above includes four terminals via a LAN connection
and one terminal via an ISDN connection. The number of the systems for LAN and
those for ISDN connections is not fixed.

Using the LAN Cascade and ISDN Connection

Installing the PCSA-MCG80 HD MCU software in two HD Visual
Communication System enables cascade connection including two main
terminals. Connecting four terminals to one main terminal allows you to make
a multipoint connection via a LAN and ISDN with up to ten points.
POWER/STANDBY
/
PCSA-MCG80
HD MCU software
Notes
• Be sure to use LAN connection between two Communication Systems connected with
cascade. Cascade connection via an ISDN is not available.
• For cascade connection, "Broadcast Mode" can be set to "Voice Activate" mode only
during communication. The "Split" and "Split (fixed)" modes are not available.
• Only the PCS-XG80/XG80S is enabled for use as a main terminal on the remote site.
186
Connection Examples of a Multipoint Connection
POWER/STANDBY
/
POWER/STANDBY
/
PCSA-MCG80 HD
MCU software
POWER/STANDBY POWER/STANDBY
/ /
LAN
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/
POWER/STANDBY
/