Configuring Multipoint; Setting Up Multipoint; Registering The Remote Parties In The Multipoint Connection List - Sony PCS-XG80 Operating Instructions Manual

Configuring Multipoint

Setting Up Multipoint

1
Open the Multipoint setup menu, set "Multipoint Mode" to "AUTO", and
make the necessarysettings.
For details on "Broadcast Mode" and "Split", see "Using the Display
Control" on page 197.
2
Open the Communication setup menu and make the necessary settings.
For details, see "Communication Setup Menu" on page 66.

Registering the Remote Parties in the Multipoint Connection List

You can register a multipoint connection list that includes all remote parties for
a multipoint connection in the Phone Book. It allows you to dial all the parties
simultaneously.
You can enter new remote parties to register in the multipoint connection list
or add the parties registered in the Phone Book to the multipoint connection
list.
188
Configuring Multipoint
Setup Multipoint
Multipoint Multipoint Mode
Broadcast Mode
Split
Setup Communication IP
Communication1 Individual Settings for Transmission/Reception
Individual Settings for Point-to-Point/Multipoint
AUTO
Split
Automatic
Save Cancel
Off
Off
Save Cancel