Using Multiple Microphones - Sony PCS-XG80 Operating Instructions Manual

Using Multiple Microphones

You can input the stereo sound from two PCS-A1 (supplied with the PCS-
XG80) or PCSA-A3 (not supplied) microphones to the system.
If you are using an echo canceling microphone, see "Using the PCSA-A7
Microphones" on page 164.
To connect the microphones
Connect the optional microphones to the MIC (A1/A3) 1 (R) and 2 (L) jacks
on the Communication System. Power is supplied to the microphones from the
System.
CAMERA
EC-MIC(A7)
1 2
to MIC (A1/A3)
1 (R)
To use the connected microphones
Set "Audio Input" to "MIC" on the Basic Setup1 page of the Audio setup
menu, and set "Input Select (MIC)" to "MIC (A1/A3)" (page 69).
To input the stereo sound from two microphones, set "Input Mode" to "Stereo"
(page 70). Set it to "Monaural" to input monaural sound from two
microphones.
Notes on installation of the microphones
• Install microphone about 50 cm (1.6 ft) away from the participants.
• Place the microphone in a quiet, echo-free location.
VISCA OUT
TERMINAL
S VIDEO IN RGB IN RGB OUT HDMI OUT ISDN UNIT
MIC(A1/A3)
1(R) 2(L)
R L R L R L
AUDIO 1 IN AUDIO OUT REC OUT 1-EXT-2 1
(PLUG IN POWER)
to MIC (A1/A3)
2 (L)
PCS-A1 (supplied with the PCS-XG80) or
PCSA-A3 microphone (not supplied)
AUX CONTROL
DC 19.5V
2
Microphone (Left)
Microphone (Right)
Using Multiple Microphones
161