For details on the setup, see "Calling a Remote Party Not Registered in the
Phone Book" on page 112.
Select "Connect", and press the ENTER button on the Remote
Commander, or press the CONNECT (
The system begins dialing the remote parties selected in step 3. "Dialing"
appears on the monitor screen.
When the system connects to all the remote points, the message "Session
Connected." appears on the screen, and the pictures of the remote parties
are displayed on the screen.
To call additional remote parties
After starting communication with the first party, press the CONNECT (
button on the Remote Commander to display the menu.
Select from Phone Book
Select from History
Perform one of the procedures described in "Starting a Connection by Calling
a Remote Party" on page 104 depending on the registration status of the remote
If some points are not connected
The following dialog appears. Select the desired item.
Some positions were not connected.
Start Meeting: Starts communication with remote parties connected.
Disconnect All: Cancels all the connections and restores the Home menu.
Redial: Redials the numbers of the points that you failed to connect.
Starting a Multipoint Connection
) button on the Remote