Final Inspection With Road Safety And Functional Check; (Inspections I, Ii, Iii And Iv); Road Safety Check; Tyre Tread Depth (Recommended Minimum Value) - BMW F 650 GS Repair Manual

Final inspection with road safety
and functional check

(Inspections I, II, III and IV)

Road safety check

•
Check wheels and tyres.
•
Check tyre pressures and correct if necessary.

Tyre tread depth (recommended minimum value)

d
Warning:
It must comply with legal regulations concerning
minimum tyre tread depth.
Front wheel ...................................... 2 mm (0.08 in)
Rear wheel ....................................... 3 mm (0.12 in)

Tyre pressures (tyres cold)

Solo
Front wheel ................................. 1.9 bar (27.0 psi)
Rear wheel ................................. 2.1 bar (30.0 psi)
With full load
Front wheel ................................. 2.1 bar (30.0 psi)
Rear wheel .................................. 2.3 bar (33.0 psi)

Roadworthiness check

– Clutch, gear shift
– Steering
– Handbrake and foot brake
– Lights and signalling equipment, telltale and
warning lights, instruments
– Side-stand switch
– If necessary, test ride
00.39