Disassembling engine
11 00 103
e
Caution:
If there is any mechanical damage, the oil tank and
the oil lines must be cleaned.
Removing cylinder head
11 12 516
–
Remove starter motor
....................................................See Group 12
a
•
Remove oil lines.
•
Remove valve cover (1).
•
Remove spark plug.
•
Remove centre screw plug on right in engine
block.
11.26
1
5
4
•
•
L
Check for secure seating with Allen key.
11 31 522 Removing camshafts
•
•
•
•
Turn crankshaft to top dead centre position with
an Allen key.
Remove screw (5) and lock the crankshaft with
locating screw, BMW No. 11 6 570.
Note:
Only unfasten chain sprockets if they need to be
replaced.
Remove chain tensioner (3).
Remove chain guide (4) from between the chain
sprockets.
Remove fasteners securing camshaft carrier (2).
2
3
E110070