Installing cylinder
11 11 150
•
Fit cylinder base gasket on engine housing: oil
bore must be clear.
•
Oil the piston rings and press the sliding piston
ring sleeve, BMW No. 11 6 510, over the piston
rings from above so that the piston projects from
the sliding sleeve by about 2 mm (0.08 in).
•
Slide timing chain and wire through chain aper-
ture of cylinder, then slide cylinder over piston.
•
Remove sliding sleeve.
•
Secure cylinder to engine housing hand-tight.
11.52
Installing cylinder head
11 12 516
L
Note:
Install a new cylinder head gasket.
•
Install the cylinder head gasket.
•
Use a wire hook to pull the timing chain through
the cavity in the cylinder head.
•
Fit cylinder head with valves installed to cylinder.
•
Secure the cylinder head and cylinder loosely to-
gether with the collar screws and nuts.
E110400