Final Inspection With Road Safety And Functional Check; (Inspections I, Ii, Iii And Iv); Road Safety Check; Roadworthiness Check - BMW R 1150 R Maintenance Manual

Final inspection with road safety
and functional check

(Inspections I, II, III and IV)

Road safety check

•
Check wheels and tyres.
•
Check/correct tyre pressures.
•
Wait at least 10 minutes after the trial run/road
test before checking/correcting engine oil level.
Tyre pressures:
Solo ....................................front 2.2 bar (31.3 bar)
............................................. rear 2.5 bar (35.6 psi)
With pillion passenger ......... front 2.5 bar (35.6 psi)
............................................. rear 2.7 bar (38.4 psi)
With pillion passenger and
luggage ............................... front 2.5 bar (35.6 psi)
............................................. rear 2.9 bar (41.2 psi)

Roadworthiness check

•
Lights
•
Indicator/warning lights
•
Horn
•
Instruments
•
Special equipment
•
Clutch
•
Gear shift
•
Steering
•
Foot brake and handbrake
•
If necessary, take the motorcycle for a test ride.
00.59