1
•
Disconnect plug of instrument panel (1).
•
Cut through cable clip.
•
Push cable holder through toward inside.
•
Turn the handlebars to the left.
•
Remove the fasteners securing the fairing
bracket.
•
Remove the fairing bracket.
•
Installation is the reverse of the removal
procedure.
X
Tightening torques:
Fairing bracket to main frame ....................... 21 Nm
Raising rear frame
–
Remove exhaust manifold.
....................................................See Group 18
a
•
Secure front wheel in position.
E460060
e
Caution:
Protect trim panels with a material such as foam
rubber (arrow) to prevent damage.
•
Use a strap to secure the rear frame to the trans-
verse arm.
L
Note:
Do not unplug the control unit.
•
Remove the BMS control unit from the holder.
•
Remove the fuse box.
•
Remove brake fluid reservoir from rear frame.
•
Remove lower fasteners securing rear frame to
main frame.
•
Slightly pretension the strap.
•
Slacken upper fasteners securing rear frame to
main frame.
E330100
46.7