Filling and charging the battery
d
Warning:
Battery acid is highly caustic.
Protect your eyes, face, hands, clothing and the
paintwork.
•
Disengage the rubber strap holding the battery.
•
Disconnect the battery breather hose.
•
Remove the battery.
•
Top up the battery acid to the upper level mark.
•
Allow the battery to stand for at least an hour.
•
Shake the battery slightly to allow the remaining
air bubbles to escape.
•
If necessary, top up again to the upper level mark
with battery acid.
•
Recharge the battery and allow to stand for
24 hours.
Charge current (amps)
.........................10 % of rated battery capacity (Ah)
•
Check the acid level and, if necessary, top up
with distilled water to the upper level mark.
•
Make a note of the charging date on the battery.
6
e
Caution:
Connect the positive battery terminal first, then the
negative terminal.
•
Apply acid-proof grease to the battery terminal
posts.
•
Install the battery.
•
Install right and centre covers.
•
Install seat.
X
Tightening torques:
Right/left covers with centre cover
to mounting frame .......................................... 2 Nm
Right/left covers to centre cover .................... 2 Nm
Centre cover to main frame at front................ 2 Nm
E000290