Removing and installing
32 72 330
clutch cable
•
Disengage clutch cable (5) from release lever.
•
Pull cable out of holder (4).
•
Remove rubber grommet (1) from clutch lever.
32.10
1
2
5
4
E320150
3
•
Make sure that slots in adjusting screw, locknut
and lever fitting (arrow) are in line.
•
Pull back cable shroud (2).
•
Pull the cable forward through the slot and disen-
gage nipple (3).
•
Pull the cable out to the rear.
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
E320140
E320160