Final inspection with road safety
and functional check
(Inspections I, II, III and IV)
Road safety check
•
Check wheels and tyres.
•
Check tyre pressures and correct if necessary.
Tyre tread depth (recommended minimum value)
d
Warning:
Thread depth must comply with legal regulations
concerning minimum tyre tread depth.
Front wheel ...................................... 2 mm (0.08 in)
Rear wheel ....................................... 3 mm (0.12 in)
Tyre pressures (tyres cold)
One-up
Front wheel ............................... 1.9 bar (27.56 psi)
Rear wheel ............................... 2.1 bar (30.46 psi)
With full load
Front wheel ............................... 2.1 bar (30.46 psi)
Rear wheel ................................ 2.3 bar (33.36 psi)
Roadworthiness check
–
Clutch, gear shift
–
Steering
–
Handbrake and footbrake
–
Lights and signalling equipment, telltale and
warning lights, instruments
–
Side-stand switch
–
If necessary, test ride
00.52