Table of Contents
Advertisement
Maintenance Instructions (US Model)
F 650 GS
F 650 GS Dakar
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
BMW Motorrad
On-board
On-board
On-board
On-board
On-board
On-board
On-board
On-board
On-board
On-board
On-board
On-board
On-board
On-board
documentation
documentation
documentation
documentation
documentation
documentation
documentation
documentation
documentation
documentation
documentation
documentation
documentation
documentation
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
consisting of
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
Rider's Manual
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
and Maintenance
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
Instructions
1
Advertisement
Table of Contents
Related Manuals for BMW F 650 GS
Summary of Contents for BMW F 650 GS
- Page 1 Maintenance Instructions (US Model) F 650 GS F 650 GS Dakar BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad On-board...
- Page 2 Please note This symbol indicates pre- cautions and measures which are essential in protecting the rider or other persons from severe or fatal injury. Specific instructions and safety precautions intended to pre- vent damage to the motorcycle. Disregarding them may render the warranty invalid.
- Page 3 Important: and will gladly advise and assist BMW refuses to accept liability you. for damage or consequential damage due to repairs or ser- Best wishes, vice work performed by other...
-
Page 4: Important Safety Information
BMW cannot assess every sin- gle product of outside origin in order to decide whether it can be used on or with a BMW vehi- cle without constituting a safety risk. For your own safety, use only... -
Page 5: Maintenance Schedule
Maintenance is divided up into Service, Inspection and Annual Inspection. BMW Inspection 1,000 km (600 miles) BMW running-in check after the first 1,000 km (600 miles). BMW Service After the first 10,000 km (6,000 miles) and every further 20,000 km (12,000 miles) (30,000 km…, 50,000 km …,... -
Page 6: Confirmation Of Maintenance
Confirmation of maintenance BMW Service Pre-delivery check 10,000 km (6,000 miles) Performed in accordance with manufacturer’s instructions Performed in accordance with manufacturer’s instructions Odometer reading Odometer reading Date, stamp, signature Date, stamp, signature BMW Inspection, BMW Inspection, 1,000 km 20 000 km... - Page 7 Confirmation of maintenance BMW Service BMW Service 30,000 km 50,000 km (18,000 miles) (30,000 miles) Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions Odometer reading Odometer reading Date, stamp, signature Date, stamp, signature BMW Inspection BMW Inspection...
- Page 8 Confirmation of maintenance BMW Service BMW Service 70,000 km 90,000 km (42,000 miles) (54,000 miles) Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions Odometer reading Odometer reading Date, stamp, signature Date, stamp, signature BMW Inspection BMW Inspection...
- Page 9 Confirmation of maintenance BMW Service BMW Service 110,000 km 130,000 km (66,000 miles) (78,000 miles) Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions Odometer reading Odometer reading Date, stamp, signature Date, stamp, signature BMW Inspection BMW Inspection...
-
Page 10: Annual Inspection
Confirmation of maintenance Annual Inspection Annual Inspection Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions Brake fluid changed: Brake fluid changed: Coolant changed: Coolant changed: Date, stamp, signature Date, stamp, signature Annual Inspection Annual Inspection Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions... - Page 11 Confirmation of maintenance Annual Inspection Annual Inspection Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions Brake fluid changed: Brake fluid changed: Coolant changed: Coolant changed: Date, stamp, signature Date, stamp, signature Annual Inspection Annual Inspection Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions...
- Page 12 Confirmation of maintenance Annual Inspection Annual Inspection Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions Brake fluid changed: Brake fluid changed: Coolant changed: Coolant changed: Date, stamp, signature Date, stamp, signature Annual Inspection Annual Inspection Performed in accordance with Performed in accordance with manufacturer’s instructions manufacturer’s instructions...
-
Page 13: Confirmation Of Service
Confirmation of service Record of all work performed in workshop Work performed km/miles Date The list is intended as a record of maintenance, warranty and repair work, the installation of optional accessories and, if appropriate, special campaign work. - Page 14 Confirmation of service Record of all work performed in workshop Work performed km/miles Date The list is intended as a record of maintenance, warranty and repair work, the installation of optional accessories and, if appropriate, special campaign work.
- Page 15 Confirmation of service Odometer replaced Odometer replaced Odometer reading is not total Odometer reading is not total distance covered. distance covered. Odometer reading Odometer reading Date, stamp, signature Date, stamp, signature Odometer replaced Odometer replaced Odometer reading is not total Odometer reading is not total distance covered.
-
Page 16: General Instructions
General instructions Your motorcycle is equipped with a digital electronic engine management system and a high-power ignition system. If you intend to perform the maintenance and general care work described in the following When the engine is running or section yourself, you must pos- the ignition is switched on, do sess the necessary knowledge not touch electrically live... - Page 17 Remember: the safety and reli- ability of your motorcycle are the most important consider- ations. BMW refuses to accept liability You should therefore not for damage or consequential attempt any complex repair or damage due to repairs or ser- maintenance tasks.
- Page 18 Tampering with the electronic Genuine BMW parts engine management system For reasons of safety, use only represents an increased safe- genuine BMW parts and acces- ty risk for the rider. sories. Genuine BMW parts are identi- cal with those fitted to your...
- Page 19 Toolkit • Vehicle toolkit under the seat Contents 1 case 1 screwdriver, reversible blade 1 cross-head screwdriver, small 4 open-ended wrenches, 1 Allen key 8 x 10 mm (0.39 in), 8 mm (0.31 in) 14 x 19 mm (0.75 in), 4 Torx screwdrivers T25, T30, 15 mm (0.59 in), T40, T45...
-
Page 20: Troubleshooting Chart
Troubleshooting chart Fault: Engine does not start or is very difficult to start Possible cause Remedy Page Wrong ignition key Operation Rider’s Manual position Chapter 1 Kill switch is off Operation Rider’s Manual Chapter 3 Power supply Blown fuse interrupted Gear engaged, clutch Select neutral or Rider’s Manual... - Page 21 – not described on pages More detailed technical infor- 14 ...62 – attended to by a spe- mation is available in the follow- cialized workshop, preferably ing publications: an authorized BMW motorcycle – Repair Manual retailer. – Electrical circuit diagrams...
-
Page 22: Removing Front Wheel
• Place the motorcycle on its sary). main stand (Dakar: use auxil- Do not scratch the rim when iary stand, BMW special tool forcing back the brake pads or number 00 1 610, or some removing the calipers (apply other, suitable auxiliary stand) masking tape if necessary). - Page 23 Removing front wheel • Remove securing screw 2, Make sure that the motorcy- using 0.39 in (10 mm) open- cle is standing firmly and can- ended wrench ( not topple forward or to either side. If a spacer 3 is installed to com- pensate component tolerances, Remove ABS sensor 1, so...
- Page 24 Removing front wheel Make sure that the motorcy- Check the brake pads cle is standing firmly and can- 33) (have them replaced if not topple forward or to either necessary). side. • Slacken axle clamp screw 3 When setting down the front with a Torx T25 bit ( wheel, take care not to damage •...
-
Page 25: Installing Front Wheel
Installing front wheel Note the installed position of • Clean and grease spacer the ABS sensor ring or the di- bushing 1 and spacer 4 and rection-of-rotation arrow on the insert them into the wheel tire. hub. As viewed in forward direction of travel: –... - Page 26 When assembly work has been completed, pull the Always have the security of the brake lever firmly several fasteners checked by a special- times to check that the front ized workshop, preferably an brake is operating correctly. authorized BMW motorcycle retailer. Optional equipment...
-
Page 27: Removing Rear Wheel
• Place the motorcycle on its the speedometer sensor. main stand (Dakar: use auxil- Do not press the brake pedal iary stand, BMW special tool down when the wheel is number 00 1 610, or some removed. other, suitable auxiliary stand) Keep dirt and moisture away –... - Page 28 Removing rear wheel • Hold the brake caliper and roll the wheel out toward the rear • Remove axle nut 3 using 0.94 in (24 mm) socket and Sprocket 6 sits loosely in the spark-plug wrench as wheel. If the wheel is laid down, extension ( make sure that the brake disk •...
-
Page 29: Installing Rear Wheel
Installing rear wheel • Roll the rear wheel between the rear swinging arm forks and carefully position the When tensioning the chain, brake disk in the brake caliper. note correct wheel alignment • Lift chain 5 onto sprocket 6 (marks on swinging fork arms). •... - Page 30 Installing rear wheel Screws 1 of rear wheel cover • Make sure that the same are secured with Loctite. number of notches has been Before reinstalling, clean the reached at marking point 5 on screw threads and coat them the left and right swinging fork with Loctite No.
- Page 31 Installing rear wheel Always have the security of the fasteners checked by a special- ized workshop, preferably an authorized BMW motorcycle re- tailer. When assembly work has Tightening torque: been completed, depress the Axle nut 3 ....100 Nm brake pedal firmly several...
- Page 32 Have the chain, sprocket and • Grip the chain at the rearmost pinion replaced by a special- point of sprocket 1 and pull ized workshop, preferably an the chain to the rear, away authorized BMW motorcycle from the sprocket retailer.
- Page 33 Adjusting chain Adjusting chain • Place the motorcycle on its main stand [Dakar: side stand] – Make sure the ground is level and firm. When tensioning the chain, • Slacken axle nut 2 using note correct wheel alignment 0.94 in (24 mm) socket and (notches in swinging fork arms).
- Page 34 • Make sure that the same BMW motorcycle retailer. number of notches has been reached at marking point 1 on the left and right swinging fork...
-
Page 35: Checking Brake Pads
For your safety, we recommend no longer clearly visible: having work on the brake sys- have the brake pads replaced tem performed by a specialized by a specialized workshop, workshop, preferably an autho- preferably an authorized rized BMW motorcycle retailer. BMW motorcycle retailer. -
Page 36: Rear Brake
For your safety, we recommend no longer clearly visible: having work on the brake sys- have the brake pads replaced tem performed by a specialized by a specialized workshop, workshop, preferably an autho- preferably an authorized rized BMW motorcycle retailer. BMW motorcycle retailer. -
Page 37: Adding Coolant
Adding coolant Use only nitrite-free antifreeze and corrosion inhibitor. Check coolant level only when the engine is cold. Top up the fluid in the expan- • Place the motorcycle on its sion tank only if the loss of cool- main stand [Dakar: side stand] ant is minor. - Page 38 It is advisable to have the cool- • Remove cap 1 from filler neck ant changed by a specialized • Top up coolant to MIN mark workshop, preferably your au- • Place motorcycle on main thorized BMW motorcycle re- (center) stand or hold it upright tailer.
-
Page 39: Notes On Changing Bulbs
Notes on changing bulbs Your motorcycle has one bulb for the low-beam /high-beam headlight, one for the parking light, one for the brake light and Your motorcycle is equipped one for the rear light, plus four with a digital electronic engine bulbs for the turn indicators. -
Page 40: Changing Bulbs
Changing bulbs • Place the motorcycle on its Turn indicators main stand [Dakar: side stand] – Make sure the ground is level and firm. • Remove securing screw 1 Switch off the ignition before • Remove turn indicator glass 3 changing a bulb. -
Page 41: Tail Light/Brake Light
Changing bulbs Tail light/brake light The rear light is also the license plate light. • Place the motorcycle on its main stand [Dakar: side stand] – Make sure the ground is level and firm. Switch off the ignition before • Remove retaining screws 1 changing a bulb. - Page 42 Changing bulbs • Place the motorcycle on its main stand [Dakar: side stand] Parking light – Make sure the ground is level and firm. • Pull off multi-pin plug 2 • Pull the rubber sleeve 1 to the Switch off the ignition before rear to remove changing a bulb.
- Page 43 Changing bulbs • Pull off multi-pin plug 2 • Pull rubber sleeve 1 to the High-beam/low-beam headlight rear to remove • Turn retainer 4 counter- clockwise to disengage • Remove bulb 3 Switch off the ignition before • Installation is the reverse of changing a bulb.
-
Page 44: Changing Fuses
It is advisable to have the elec- number of spare fuses in the trical system checked by a spe- toolkit ( 17). cialized workshop, preferably Use only fuses of the specified an authorized BMW motorcycle rating and type. retailer, if fuses blow frequently. - Page 45 Fuses Equipment connected to fuses 1 Engine electronics ..15 A 2 Instrument panel, on-board socket, diagnosis plug, 6 Brake light, OA plug ...... 10 A turn indicators, 3 Horn, instrument panel, headlight flasher ..7.5 A instrument lighting ..7.5 A 4 Low-beam headlight ..
-
Page 46: Side Panel
Side panel Removing right side panel • Remove the four securing screws 2 holding the turn indicator • Remove 2 retaining screws 1 • Slacken securing screw 3 Removing and installing • Pull right side panel out of side panel locator 4 at bottom and lift it •... - Page 47 Side panel Removing and installing left side panel The procedure for removing and installing the left side panel is analogous to that for the right Removing and installing side panel. center panel Remove the oil filler plug before • Remove the remaining two removing the left side panel.
-
Page 48: Jump Starting
Jump starting Jump starting Battery adapter points Do not use proprietary start- BMW calls an easily accessible assist sprays to start the battery positive terminal 1 and a engine. defined grounding point 2 the Use only jump leads fitted with battery adapter points. - Page 49 Jump starting • On the BMW, battery adapter points 1 and 2 are the con- nection points for jump start- • Remove protective cap 3 from the positive terminal • Connect one end of a jump lead to positive terminal 1 of...
-
Page 50: Battery Safety Instructions
Battery safety instructions Always wear protective gog- gles and protective gloves when performing work asso- ciated with the battery. If anyone comes into contact with battery acid or is exposed to toxic fumes from the battery, have them exam- ined by a physician without delay. - Page 51 – The battery can be recharged • Check battery acid level with the BMW battery trickle • Store the battery in a cool, dry charger room – Charge the battery prior to lay-ups and before returning to use –...
-
Page 52: Removing Battery
Removing battery • Place the motorcycle on its main stand [Dakar: side stand] – Make sure the ground is level and firm. • Remove the seat • Remove the side panel Do not damage cables and 44-45) hoses when removing. •... -
Page 53: Installing Battery
Installing battery Before connecting the bat- tery, make sure the ignition is switched off. Make sure that breather hose 4 To avoid short-circuits: for the battery is routed free of • Connect positive battery kinks and is not clogged. lead (+) 2 first •... -
Page 54: Checking Battery Acid Level
Battery • Check the acid level at the MIN/MAX marks UPPER mark LOWER mark • Top up with distilled water only as far as the MAX (UPPER) mark Checking battery acid level – Check the level of acid in the Do not set the battery on the battery every three months or motorcycle when you are top-... -
Page 55: Changing Air Filter
Changing air filter • Place the motorcycle on its • Pull air filter element 5 out of main stand [Dakar: side stand] the air filter housing – Make sure the ground is • Place the new filter element in level and firm. position inside the air filter •... -
Page 56: Spark Plugs
Spark plugs When the engine is running or the ignition is switched on, do not touch electrically live components, terminals or wiring. – Risk of fatal accident • Work on the electrical sys- tem only when the circuit has been interrupted (igni- tion and lights switched off). - Page 57 Spark plugs Changing secondary spark plug The direct ignition coils have • Turn direct ignition coil 1 as different color codes: take care far as it will go clockwise not to mix them up. Direct igni- (arrow) tion coil of the •...
- Page 58 Spark plugs • Remove the direct ignition coil of the secondary spark Changing primary plug spark plug • Turn direct ignition coil 1 as far as it will go counter-clock- wise (arrow) • Pry direct ignition coil 1 up In order to prevent foreign mat- and off, using 0.59 in (15 mm) ter from entering the combus- open-ended wrench (...
- Page 59 Cleaning/care Do not use aggressive or pene- trating cleaning agents or sol- vents, as they would cause damage to rubber and plastic parts. Correct and regular cleaning is Do not use a steam jet or high- an important factor in maintain- pressure cleaning equipment.
-
Page 60: Washing Motorcycle
Cleaning/care • Thoroughly dry all wet sur- Washing motorcycle faces • Do not use solvents or clean- ing products on the instru- ment group, switches or After cleaning and before windshield starting a journey, always test • Do not scratch the wind- the brakes. - Page 61 Cleaning/care Removing road salt • Wash the motorcycle down Cleaning windshield immediately with cold water at • Remove dirt and dead insects the end of the journey. with a soft sponge and plenty of water Do not use warm water – this aggravates the effect of the salt.
- Page 62 • Minor damage caused by stones striking the painted surface can be touched up with a BMW touch-up pencil of the correct color Care of chain • Regularly apply a spray lubri- cant to the chain; spray lubri-...
- Page 63 • Coat bright metal/chrome- gine oil changed by your autho- plated parts with an acid-free rized BMW motorcycle retailer. grease (e.g. Vaseline) Work needed in conjunction • Place the motorcycle on its with storing or returning to use...
-
Page 64: Returning To Use
Returning to use Returning to use • If necessary, remove protec- tive wax coating • Clean the motorcycle ( • Check/correct tire pressures • Install a charged battery Rider's Manual, Chapter 2) • Check brakes • Coat the battery terminals Rider's Manual, Chapter 2) with grease suitable for bat- •... - Page 65 Engine F 650 GS F 650 GS [37 kW] [25 kW] Type Liquid-cooled single-cylinder four- stroke engine with 4 valves with bucket tappets, 2 overhead cam- shafts, dry-sump lubrication Displacement 652 cc 652 cc Maximum rated output in accordance with DIN 70 020...
-
Page 66: Power Train
Power train F 650 GS Clutch Multi-plate clutch running in oil bath Primary transmission 37/72 = 1:1.946 Transmission 5-speed, with claw-action shift, integrated into engine block Gear ratios 1st gear = 2.75 in the transmission 2nd gear = 1.75 3rd gear = 1.31 4th gear = 1.05... -
Page 67: Frame And Suspension
Frame and suspension F 650 GS Frame Bridge-type frame with bottom rail Location of type plate On top rail of main frame, right Location of vehicle identification On right of steering head number (VIN) Front brake Hydraulically actuated single-disk brake with 2-piston floating caliper... - Page 68 Frame and suspension F 650 GS Suspension Front Telescopic fork with stabilizer Total suspension travel 6.69 in (170 mm) Dakar version 8.27 in (210 mm) Fixed tube diameter 1.61 in (41 mm) Rear Central suspension strut pivoted to lever system. Spring base point and rebound-phase damping con- tinuously adjustable.
- Page 69 F 650 GS F 650 Dakar Wheels and tires Spoked wheel You can obtain detailed information on approved tire sizes and makes from your authorized BMW motor- cycle retailer or by visiting www.bmw-motorrad.com on the Internet Front wheel Size and designation 2.50“...
-
Page 70: Fuel And Lubricants
Temperatures above or below the limits quoted for the individ- ual SAE classifications are allowable for brief periods only. All engine oils supplied by BMW are subject to regular BMW quality assurance checks. BMW does not approve the use of any upper-cylinder lubricants or similar oil additives. - Page 71 Fuel and lubricants F 650 GS Telescopic fork oil Approved grades BMW telescopic fork oil Refill after disassembly 0.64 US quarts (0.61 l) Dakar version 0.59 US quarts (0.56 l) Oil change 0.63 US quarts (0.60 l) Dakar version 0.58 US quarts (0.55 l)
- Page 72 Fuel and lubricants F 650 GS Brake fluid DOT 4 We recommend BMW brake fluids Use only new brake fluid to DOT 4 specification. Coolant Brand-name long-life antifreeze and corrosion inhibitor Use only nitrite-free antifreeze and corrosion inhibitor. Capacity 1.37 US quarts (1.3 l) (0.1 US quart/...
-
Page 73: Electrical System
Electrical system F 650 GS Spark plugs Approved makes/types NGK DR8 EB Electrode gap 0.02 - 0.03 in (0.6 - 0.7 mm) Wear limit 0.0354 in (0.9 mm) Fuses “Minifuse” flat-socket fuses Ratings 4 A, 7.5 A, 10 A and 15 A... -
Page 74: Dimensions And Weights
Dimensions and weights F 650 GS Overall length 86.02 in (2,185 mm) Dakar version 86.18 in (2,189 mm) Width across mirrors 35.82 in (910 mm) acr. handlebars (with 31.69 in (805 mm) weights) Dakar version 35.24 in (895 mm) across front footrests 22.36 in (568 mm) - Page 75 Dimensions and weights F 650 GS Wet weight (ready to ride, tank full) 428 lbs (194 kg) Maximum allowable weight 838 lbs (380 kg) Allowable wheel loads Front 273 lbs (124 kg) Rear 564 lbs (256 kg)
-
Page 76: Performance Data
Performance data F 650 GS F 650 GS [37 kW] [25 kW] Maximum speed acc. to type approval test 105 mph 90 mph (170 km/h) (145 km/h) two-up 100 mph 84 mph (162 km/h) (135 km/h) Power/weight ratio ready for road + rider 15.96 lbs/kW... - Page 77 A - C parking light, 40 Accessories, genuine BMW rear light/brake light, 39 parts, 16 turn indicators, 38 Air filter, 53 Technical data, 71 Allowable gross weight, 73 Annual Inspection Confirmation of Capacity, engine, 68 maintenance, 8, 9, 10 Castor, 66...
- Page 78 D - P Dimensions and weights, 72, 73 Gear ratios, 64 Displacement, 63 General instructions, 14, 15 Drive chain Ground clearance, 72 Check, 31 Headlights, 71 Elasticity, 74 Engine oil Capacity, 68 Idle speed, 63 Consumption, 68 Inspection Notes, 3 Technical data, 68 Viscosity, 68 Engine speed limit, 63...
- Page 79 P - Z Power output, 63 Power/weight ratio, 74 Technical modifications, 15 Pre-delivery check, 4 Telescopic forks, 69 Primary drive ratio, 64 Tires, 67 Approved sizes, 67 Technical data, 67 Rear brake Tire pressures, 67 Checking pads, 34 Tread depth, 67 Technical data, 65 Toolkit, 17 Rear wheel...
- Page 82 Motorcycle data Model Frame no. Color no. First registered on Registration no. Retailer data Person to contact for Service work Ms./Mr. Tel. no. Retailer’s address with telephone no. (company stamp)
- Page 83 Maintenance Instructions (US Model) F 650 GS F 650 GS Dakar BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad BMW Motorrad On-board...
- Page 84 Please note This symbol indicates pre- cautions and measures which are essential in protecting the rider or other persons from severe or fatal injury. Specific instructions and safety precautions intended to pre- vent damage to the motorcycle. Disregarding them may render the warranty invalid.
- Page 85 Errors and omissions excepted. national-market specification. © 2003 BMW Motorrad No claims will be entertained as Not to be reproduced either a result of such discrepancies. wholly or in part without written...
- Page 86 BMW recommends Castrol BMW Motorrad Printed information Order No.: 01 47 7 685 947 10.2003 The Ultimate 1st edition US / RF Driving Machine...
- Page 87 Errors and omissions excepted. national-market specification. © 2003 BMW Motorrad No claims will be entertained as Not to be reproduced either a result of such discrepancies. wholly or in part without written...
- Page 88 BMW recommends Castrol BMW Motorrad Printed information Order No.: 01 47 7 685 947 10.2003 The Ultimate 1st edition US / RF Driving Machine...