1
Removing and installing right
handlebar fitting
–
Place motorcycle on its centre stand.
–
Remove seat.
–
Remove left, right and centre covers.
•
Cut the cable tie at the handlebar.
e
Caution:
Refer to notes on the hazards involved in handling
brake fluid.
•
Disconnect and seal brake hose (1).
•
Remove brake microswitch (2).
•
Release cover (6) and leave it dangling on the ca-
ble.
•
Remove throttle-cable roller (7) and disengage
throttle-cable nipple (8).
•
Remove brake fitting.
3
2
8
•
•
•
5
7
6
Remove fastener for throttle cable (arrow) and
pull out the throttle cable.
Remove handlebar weight (4).
Remove housing (3) together with twist-grip
tube (5).
4
E320050
E320090
32.7