Removing and installing
34 11 021
front brake calliper
e
Caution:
Refer to notes on the hazards involved in handling
brake fluid.
•
Press the brake calliper against the brake disc in
order to force the pistons back.
4
•
Release brake line (3) at brake calliper and seal
the line.
•
Loosen retaining screws (4) for brake support
bracket.
•
Carefully pull brake carrier (1) with brake
calliper (2) off the brake disc.
e
Caution:
Do not damage brake pads.
•
Installation is the reverse of the removal proce-
dure.
L
Note:
Remove sealing rings for brake line.
e
Caution:
Top up brake fluid and bleed brake system.
Operate brake several times until brake pads are
correctly seated.
X
Tightening torque:
Brake calliper to fork slider tube .................. 41 Nm
Brake line to brake calliper ........................... 18 Nm
Removing and installing front
34 11 008
brake pads
See Group 00
1
2
3
E340050
34.5