Removing and installing roll-over
valve
–
Remove seat.
1
•
Disconnect breather hose.
•
Release fasteners (1).
•
Remove roll-over valve with gasket.
•
Remember to clean the sealing faces before re-
installing.
X
Tightening torques:
Roll-over valve to fuel tank ............................. 3 Nm
Replacing fuel filter
16 12 008
See Group 00
16.8
Removing and installing fuel
16 14 011
pump
e
Caution:
Note risks when handling fuel.
Disconnect ground lead from battery and insulate.
–
Remove seat.
E160080
•
Disconnect the plugs for fuel-level sensor (3) and
fuel pump (2).
•
Close off fuel supply line (5) and the fuel return
line (4) with hose clips, BMW No. 13 3 010.
•
Open the hose clips (arrows) and disconnect the
fuel lines from the fuel-pump unit.
2
5
4
E160020
3