Removing/installing rear wheel
36 31 861
bearings
–
Remove rear wheel.
–
Remove chainwheel carrier with chainwheel from
rear wheel hub.
–
Lay the wheel on two wooden blocks so that the
brake disc is clear of the bench.
L
Note:
To facilitate removal or installation, heat the wheel
hub to 100 °C (212 °F).
Use temperature measuring device,
BMW No. 00 1 900, to check heat rise.
00 8 571
36 6 651
36.8
6
5
Removing left-hand wheel bearing
•
Remove spacer (2).
•
Lever out shaft sealing ring (1) with screwdriver.
•
Remove circlip (3) with suitable pliers.
•
Remove wheel bearing (4) with counter-support,
BMW No. 00 8 572, internal puller,
BMW No. 00 8 571, and support ring,
BMW No. 36 6 651.
Removing right-hand wheel bearing
•
Remove wheel bearing (5) with counter-support,
BMW No. 00 8 572, and internal puller,
BMW No. 00 8 571.
•
Remove spacer sleeve (6).
00 8 572
XF??????
F360050
1
2
4
3
E360020