Centering lateral runout
S
e
Caution:
Never attempt to eliminate all the lateral runout by
adjusting only one or two spokes.
L
Note:
Vertical runout must be checked every time lateral
runout is corrected.
•
Correct lateral runout "S" by tightening the
spokes on the opposite side (arrow).
Lateral runout ...........................max. 2 mm (0.08 in)
36.14
Centering vertical runout
F360160
e
Caution:
Spokes which protrude from the spoke nipples must
be shortened.
•
Correct vertical runout "H" by tightening the
spokes at left and right (arrow).
Vertical runout.......................... max. 2 mm (0.08 in)
H
F360170