View System Monitor; Program Status; Figure 9.6 Program Status Screen With Commands Menu - Nortel CC MIS User Manual

Release 5.2
CC MIS Maintenance Guide

View system monitor

The View System Monitor screen is comprised of up to seven status
screens (depending on type of partition): Program, Lock, Partition,
Physical Node, Virtual Node, Port, and CPU Utilization. The View
System Monitor screen is selected from the Diagnostics menu.
The Program, Lock, Partition, Port, and CPU Utilization status screens
are accessed on the system monitor screen by means of a Commands
menu. Pressing a function key (PF1 or PF2 - depending on terminal
type) displays the Commands menu. When a status screen is selected,
the system monitor screen is redrawn with the selected status.
The Set refresh rate command is selected from the Commands menu
and allows the user to select how often the system monitor should up-
date its real-time information. Valid refresh rates are 1-60 seconds in
one-second increments. The default is five seconds.

Figure 9.6 Program Status screen with Commands menu

Program status

The Program Status screen is the first screen displayed when the View
System Monitor command is selected on the Diagnostics.
CC MIS
CC MIS
9-13