Mapa Messages - Nortel CC MIS User Manual

Maintenance interface
Hide thumbs Also See for CC MIS:
Table of Contents

Advertisement

CC MIS
CC MIS
System Log Messages

MAPA Messages

Introduction
This section contains the error messages generated by the MAPA subsystem of the CC MIS product. The CC MIS
product runs on a Down Stream Processor, hence the error messages will not appear in the SWITCH LOG.
Some of the messages listed in this section relate to MAPA's networking capabilities and cannot be generated in this
release of the product. These logs could be generated in future releases when these capabilities are used. These logs
will be identified by the phrase (future) in the message text.
Informational Messages
This section lists the informational messages that may be generated by the MAPA process. These messages are pro-
duced as part of normal system operation to indicate the occurrence of significant events.
Clock has been synchronized to network time
MAPA has completed synchronizing the time on the local node with the network time. (Action Code: J)
Node nnn (xxxxxx) is UP
The remote node whose ID and name are given by "nnn" and "xxxxxx" respectively is now operational. (Action
Code: J)
Starting network time synchronization...
MAPA is starting to synchronize the time on the local node with the network time. This log only appears during
system start-up. (Action Code: J)
System shutdown completed
MAPA has completed the orderly shutdown of the system and is exiting without error. This occurs when the sys-
tem is shut down. (Action Code: J)
System startup initiated
MAPA is starting the orderly startup of the system. (Action Code: J)
Warning Messages
This section lists the warning messages that may be generated by the MAPA process. These messages usually indi-
cate an unusual condition that can be appropriately handled by the MAPA process, and which does not prevent the
MAPA process from continuing operation.
Accept failed on connection socket - type: xxxxxx
MAPA was unable to accept a connection request as part of the startup of a connection-oriented service. The
"xxxxxx" field will indicate either AF_UNIX or AF_INET depending on whether the connection request was
internal or external respectively. (Action Code: B)
B-10
Release 5.2
(future)
(future)
(future)
297-2671-545

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cc mis 5.2

Table of Contents