Monitoring A Log; Step 9-8: Monitoring A Log - Nortel CC MIS User Manual

Release 5.2
CC MIS Maintenance Guide
The commands available when using the search option are Abort (de-
fault) and Search. Abort returns the user to the log viewer screen and
no search is performed. The Search command initiates the search with
the parameters the user specified. After a search has been done, the
Search Again key is activated in the log viewer screen. This option
allows the user to continue the previously performed search.

Monitoring a log

The Monitor command allows the user to monitor the system log and
the maintenance log as messages are received. If the CC MIS system
has discontinued logging due to the file size restrictions, this com-
mand will allow the user to view the log messages that are being gen-
erated, but the messages will not be logged in the system log file.
Note: The Monitor command will be available only if the selected log
is the system log or maintenance log.
Perform the steps below to monitor a log.

Step 9-8: Monitoring a log

1. Access the Diagnostics menu.
2. Enter l to display the Logs screen.
The Logs screen displays.
3. Press the Options function key.
The system displays the logs available for selection.
4. Select either the System log or Maintenance log and press <Return>.
5. Press the Commands function key.
The system displays the commands available for selection.
6. Select the Monitor command and press Return.
The system displays the Monitor screen for the selected log (either the
System log or the Maintenance log).
7. Press the <CTRL>C key to return to the Logs screen.
The system displays the Logs screen.
CC MIS
CC MIS
9-11