Guidelines - Nortel CC MIS User Manual

CC MIS
5-8

Guidelines

Use the steps below to back up customer data.
Step 5-4: Backing up customer data
1. Access the Backup and Restore Utilities menu.
2. Enter b to back up customer data.
The system displays the Backup screen.
3. Move cursor to the backup field for the partition and press the Options
function key for the Options menu. Select the desired setting [1. No, 2. Yes, 3.
Yes (Definition Only), or 4. Yes (Data Only)].
4. Press the Commands function key to display the commands menu.
5. Select the Start Backup command (item 2).
6. A pop-up dialog box appears with the following message:
Insert a blank tape and wait until the tape drive is ready. Press "y"
when ready, "q" to quit.
Ready? (y/q)
7. Enter y to begin the backup.
8. During the backup process, view the Backup Information area of the
Backup screen for important information and messages regarding the
progress of the backup.
Note: A message will be displayed when a new tape needs to be
inserted. This area will also display the tape number and the name
of the item being backed up.
9. When prompted, remove the tape from the cartridge tape drive by
moving the eject latch from the right to the left or by pressing the eject
button.
10. To exit the Backup screen, press the Commands function key and
select the Exit option.
The Backup and Restore Utilities menu is displayed.
Release 5.2
297-2671-545